5-Channel DMX/RDM LED Decoder — RGB+CCT, 12–48 V, 5×4 A

The 5-Channel DMX/RDM LED Decoder (D5-E class) drives RGB+CCT LED strips and fixtures from a DMX512 control signal. It features a bright numeric display for quick addressing, constant-voltage outputs, and RDM support for remote setup. Compact, reliable, and installer-friendly for venues, sets and architectural projects.

Key Features

• DMX512 & RDM: Standard DMX control with remote device management for addressing and status.
• 5 channels @ 4 A each: Ideal for RGB+CCT (5-in-1) LED strips.
• Wide input range: 12–48 V DC constant-voltage systems.
• Numeric display & buttons: Fast channel addressing and mode selection.
• Installer-friendly: Compact body, screw terminals, clear labelling.

Specifications

• Input voltage: DC 12–48 V
• Output: 5 channels, 4 A per channel (constant-voltage PWM)
• Max load power (per channel): 48–192 W (dependent on input voltage)
• Total current: up to ~20.5 A
• Protocol: DMX512 with RDM (address via onboard display)
• IP rating: IP20 (indoor use)
• Certifications: CE & RoHS
• Enclosure size (approx): 180 × 60 × 50 mm; ~0.4 kg gross

Typical Wiring

• Power: Connect a suitable constant-voltage LED PSU (12/24/36/48 V as required by your LED).
• LED load: RGB+CCT strips to CH1–CH5 (observe polarity and current limits).
• Control: DMX IN/OUT daisy-chain. Set start address on the front panel.

Use Cases

• RGB+CCT architectural cove and feature lighting
• Film/stage sets needing fine white-point control (CCT)
• Installations standardising on 12–48 V constant-voltage systems

In the Box

• 1 × 5-Channel DMX/RDM LED Decoder (D5-E class)
• Quick start info (basic address/mode guide)

Notes

• Use within rated current per channel; ensure adequate PSU headroom.
• Indoor use only (IP20). For enclosed installs, allow ventilation.